Storm Vs Aquabarista (2024)

FAQs

How do I reset my water cooler dispenser? ›

Locate the switch at the back of the machine. This is the reset switch. Turn the dispenser off using the switch, unplug your cooler once more, and leave it unplugged overnight. Once you have plugged it back in the next day, wait three to five hours before placing a new jug in the reservoir.

Water Not Dispensing

Ensure Hot/Cold tanks have been primed (see section for priming of water system) • Ensure bottle is not empty. If empty, replace it • Ensure that the water selection lever is fully depressed • Ensure all SmartFlo SF-1 tubing is free of any holes, cuts or cracks.

There are several reasons your water cooler may not be working. Ice can form and cause a blockage. To prevent ice from becoming a problem, it is best to unplug the water cooler periodically overnight. Ice around the bottle or repeated ice problems are symptoms of a refrigerant leak.

If your water cooler was frozen you should probably adjust the temperature of the thermostat. Look for the small brass screw on the back and turn it one-quarter turn (counter-clockwise). Replace the bottle and plug the cooler back into the electrical source.

If the water filter is not connected or inserted well, the water dispenser may not work. Make sure the water filter is locked in place properly. A clogged water filter is often a culprit of poor water pressure.

A blocked, kinked, or frozen water line

Water can stop flowing from the fridge dispenser when supply lines become frozen, clogged, or kinked. Some water lines run through the freezer, so if the temperature is set too low, the water line will become frozen. If there is ice in the line, allow it to defrost.

Several problems can interfere with making ice properly or dispensing ice. The ice maker or dispenser could be jammed or broken, a dirty water filter or kinked water line could be blocking water flow or the water inlet valve could be clogged or faulty. Here are the most common ice maker problems.

If your water dispenser isn't working, it's most likely that the issue is with the power source. Firstly, ensure your dispenser is correctly plugged in at the wall and that the mains power is turned on. If you don't find the cause of the problem here, check your water supply next.

The likely culprit is an air lock somewhere in your pipes. This is especially true if the warm water upstairs is accompanied by a decline in water flow. Other causes of this issue include frozen pipes, leaks, damaged supply lines, and more.

How do you unblock a water dispenser? ›

When cold water is lacking to just one faucet, it's possible the problem is the faucet itself. If you've gone through the simple stuff and have not gotten the cold water flowing, it may be an issue with the faucet's cartridge or one of the parts within the handle stem assembly that allows water to flow freely.

A well-made AIO water cooler can last about 3 – 6 years. Replace your CPU cooler when it's broken or the cooling fans are broken. Replace the thermal paste of your CPU every three to five years or after checking the thermal paste for decomposition.

Airlock – This is a very simple problem that occasionally occurs with coolers that have just been installed or serviced. The cooler simply needs to be reset. This can be done by holding down/pressing both taps at the same time for a couple of minutes to allow the air to escape.

Water dispensers have become an essential appliance in many households and offices, providing convenient access to clean and cold drinking water. However, like any other device, water dispensers can encounter issues over time and require professional repair and maintenance services.

If your Cooler Controller does not respond properly after a power outage, then either an internal component has failed (which is not covered by product warranty), or the unit needs to be reset. To reset unit, push reset button using supplied tool (or equivalent).

Common causes of pump underperformance include a clogged water reservoir, impeller damage, and power supply issues. If they haven't been serviced and checked for a couple of years there are likely to be all sorts of issues. Underperforming pumps water pumps are one of them.

One of the primary electrical problems you may encounter while running an air cooler is power supply-related. These can include fluctuations in voltage, power surges, or inadequate power supplies. Such problems can cause the air cooler to malfunction, reduce cooling efficiency, or even stop working altogether.